Panasonic KX-TD1232NE Programming Manual page 348

Program
[629-630] Outgoing Permitted CO Line
Assignment – Day / Night for TD286 Extension
[632] CLIP / COLP Number Assignment for
TD286 Extension
[800] SMDR Incoming / Outgoing Call Log
Printout
[801] SMDR Format
[802] System Data Printout
[803] Music Source Use
[804] External Pager BGM
[805] External Pager Confirmation Tone
[806-807] Serial Interface (RS-232C)
Parameters — Port 1 / Port 2
[813] Floating Number Assignment
[814] Modem Standard
[817] TD197 Baud Rate Set
[818] Timed Reminder Message Assignment
[990] System Additional Information
[991] COS Additional Information
3 DECT Programming
Program
[020] PS Flexible Button Assignment
348
All ports – all CO lines – Enabl — Day / Night
All ports – Not Stored
Outgoing calls – Off; Incoming calls – Off
Page length – 66; Skip perforation – 0; Page width –
80
Not applicable.
Hold and BGM – Music 1
All external pagers – Disable
On
New Line Code = CR+LF; Baud rate = 9600; Word
length = 8;
Parity = NONE; Stop Bit = 1 — Port 1 / Port 2
Pager 1=296; Pager 2=297; Pager 3=396;
Pager 4=397; Ringer 1=298; Ringer 2=398;
Modem=299;
DTA=399; Hunt Grp. 01 through 32= Not Stored
CCITT
Master and Slave – V.34-33600
Not Stored
See "Default" shown in the lists.
Bit 5: All COS – 1
All PSs – CO 1 = Loop-CO, CO2 and CO3 = Not
Stored
Default
Default
Default Values