Disa Card / Unit And Remote Card / Unit Installation - Panasonic KX-TD816 Installation Manual

2.4.9 DISA Card / Unit and Remote Card / Unit Installation

The DISA Card (KX-TD191 and KX-TD199), DISA Unit (KX-TD190), Remote Card (KX-
TD196), High Speed Remote Card (KX-TD197) and Remote Unit (KX-TD198) can be
installed as follows.
Main Unit
KX-TD816
KX-TD1232
The DISA Unit and the Remote Unit can also be attached with other line expansion unit.
If you use the KX-TD170 or KX-TD174 with the KX-TD197 / KX-TD198, you must use the
KX-TD170- or KX-TD174- . The former unit does not work properly with the KX-TD197
/ KX-TD198. Please see the back of the unit and check " " is marked.
Example
KX-TD816
Installing the DISA Unit (KX-TD190) or Remote Unit (KX-TD198)
1.
Loosen the two screws on the cover plate. Insert your fingers into the slits to remove the
cover plate.
Slit
Note
There are two cover plates. Any of them can be removed, as needed.
General Installation
For DISA feature
KX-TD190,
KX-TD198 with KX-TD199
KX-TD191
MODEL NO.KX-TD170
Slit
2.4 Installation of Optional Cards and Unit
For remote access
KX-TD198,
KX-TD190 with KX-TD197
KX-TD196, KX-TD197
99