Step 12. Perform the frequency accuracy calculations either using a spreadsheet
Step 13. Repeat steps 4 to 12 above for the remaining frequencies, spans and
Step 14. Reset the IF Gain (press the
NOTE
Test Descriptions
Frequency Accuracy
®
such as Microsoft
bandwidths as listed in the data into the Test Record. Ensure the
measured values are within its published specification.
Enter the service password
and
Test
Fixed IF Gain (Off)
The DSP bandwidths are verified at the narrowest bandwidth only. This
is due the fact that they use digital sample processing (DSP), therefore it
is only necessary to verify the narrowest bandwidth. The NFA N8972A
does not support DSP.
44
Excel (see page 49), or manually (see page 50).
key, then
System
press
-, 2, 0,1 ,0
.
,
, and
More
More
,
and then press
Enter
Service
.
Service
IF
Chapter 2