Keysight NFA Series Performance Verification And Calibration Manual page 45

Table 2-6
Equipment description
3.5mm Calibration Kit
3.5mm Calibration Kit
Cable
Adapter
Adapter
Adaptor
UWave Cable
a. Option 004 is only required for the ET models.
b. Option 004 is only required for the ET models.
c. Part 1 of this procedure lists hard and soft keys for the 8753ET. Other network analyzers such
as the 8753D or E may have different hard and soft key labelling. Please refer to the
appropriate Users Guide for the relevant menu maps.
Test Equipment required for Input VSWR test
Critical specification for
equipment substitution
Impedance: 50
Frequency Band: 10 MHz to
3 GHz
UUT: N8974A and N8975A
Impedance: 50
Frequency Band: 3 GHz to
26.5 GHz
UUT: N8974A and N8975A
50 N Type (M to M)
Frequency Band: 3 GHz to
26.5 GHz
50 N Type (F) to 7 mm
(included in 85032B N Type
Calibration Kit)
2.4 mm (M) to 3.5 mm
Precision (F)
2.4 mm (M) to 3.5 mm
Precision (F)
2.4 mm (M) to 2.4 mm (M),
81 cm (32 in.)
Frequency band: 3 GHz to
26.5 GHz
Chapter 2
Recommended model
Ω
85033D
Ω
85052D
11500C
85054-60001
1250-1745
11901C
85133C
Test Descriptions
Input VSWR
25