Test Descriptions
Frequency Accuracy
Step 9. Once the single sweep is complete set the NFA to autorange (press the
key and
Scale
Step 10. Before obtaining the P
ensure that the filter shape is similar to the one relating to the
bandwidth in Figure 2-8 and Figure 2-9.
Step 11. Obtain the P
). Use the tab keys below the display to scroll through the results.
Table
Alternatively output the trace data to disk, using the File Manager as
follows:
1. Insert a writable disk in drive A: and press the
.
Trace
Ensure that drive A: is selected as the To:
2. Enter the file name or use the default provided and press
save the
The data can now be used in a spreadsheet application to perform the
following calculations.
42
).
Autoscale
measurements and performing the calculations
hot
tabulated measurements (press the
hot
file to disk.
*.CSV
key and
Format
key and
File
Save
.
path
Enter
Chapter 2
,
to