System Board - HP ZBook 17 G5 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows operating system
Description
Intel Core i5-8300H processor
Intel Core i5-8400H processor
Intel Core i7-8750H processor
Intel Core i7-8850H processor
Intel Xeon E-2176M processor
Intel Xeon E-2186M processor
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the any smart cards and memory cards.
5. Remove the bottom cover (see
6. Remove the battery (see
7. Remove the memory modules (see
8. Remove the ODD (see
9. Remove the SSDs (see
10. Remove the middle cover (see
11. Remove the fans (see
12. Remove the keyboard (see
When replacing the system board, be sure to remove the following components (as applicable) from the
defective system board and install on the replacement system board:
Heat sink (see
●
● RTC battery (see
● SSD card on the bottom of the board (see
Memory on the bottom of the board (see
●
TouchPad button cable
●
72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service door on page
Battery on page
Memory modules on page
ODD on page 48).
Solid-state drive (SSD) on page
Middle cover on page
Fans on page 70).
Keyboard on page
Heat sink on page 74)
RTC battery on page 83)
41).
43).
51).
46).
61).
144).
Solid-state drive (SSD) on page
Memory modules on page
Spare part number
L28459-xx1
L28460-xx1
L28461-xx1
L28462-xx1
L28457-xx1
L28458-xx1
84)
86)