Start Laser Radiation For Marking; Check The Marking Position Using The Guide Laser - Panasonic NAVI smart Quick Reference

2-8 Start laser radiation for marking

2-8-1 Check the marking position using the guide laser

For LP-GS051, LP-GS051-L, LP-RC, LP-RF and LP-RV, you can use the guide laser to display the marking field, marking
image, masked objects, or work distance. For LP-GS052, only the pointer is available as a guide laser function.
1.
Set your workpiece on the marking position.
Set the appropriate work distance depending on your laser marking system.
Model
LP-GS501, LP-GS502
LP-GS503
LP-RC
LP-RF, LP-RV
2.
Select the "Guide laser" tool in the ribbon.
The "Test marking/guide laser" dialog appears.
3.
Select "Work distance" for "Guide laser display" and
select "Guide laser ON" to start radiating the guide
laser.
Adjust the work distance so that the dot overlaps with the center of the crosshairs.
32
Work distance
111 mm
71 mm
103 mm
190 mm
The guide laser indicates the work distance.
ME-NAVIS2-QR-1