Pulse Transient Operation; Toggle Transient Operation - ITech IT8500plus Series User Manual

4.5.2 Pulse Transient Operation

Press [Shift]+[2] (Tran) enter the transient operation setup menu:
Steps
10
11

4.5.3 Toggle Transient Operation

Operation
[Shift]+[2]
1
Press
move [
select ON., press [Enter]
to confirm.
2
Press [
transient operation mode
as PULSE(the indicator
lamp Trig will be lighted)
3 Set the rising slope, press
[Enter] to confirm
4 Set the
slope,press
confirm
Set level A,press [Enter] to
5
confirm
6 Set level B,press [Enter]
to confirm
7 Set the time width,press
[Enter] to confirm
8 Open the transient test
function, mentain on the
"on"selection
[Enter] to confirm
9 Then the VFD will display
TRAN and Trig
Turn on the load, press
[Shift]+[ ] (Trigger) to
trigger
Press anyone of [CC/CV/CW/CR] button will quit the
transient test,if you want to continue the test again,please
repeat 1-10 steps.
Copyright © Itech Electronics Co., Ltd.
VFD Display
TRAN ON
(Tran),
] key to
MODE
] to select
UP=1A/US
descending DOWN=2A/US
[Enter] to
Level A=5.000A
Level B=10.000A
WIDTH=5S(0.00005-3600S)
TRAN
, press
10.0000V 0.0000A
0.00W
Trig
Basic Operation
OFF
CONTINUOUS >
ON OFF
TRAN. 0
34