Combination Keys - ITech IT8500plus Series User Manual

(Gray)
(Gray-white)
0
~
ESC

2.5 Combination Keys

Press [ Shift ] button first and then other keys to achieve all kinds functions in
the following table.
[ Shift ]+ [ 1 ] (Short)
[ Shift ]+ [ 2 ] (Tran)
[ Shift ] + [ 3 ] (List)
[ Shift ] + [ 4 ] (Save)
[ Shift ] + [ 5 ] (Battery)
[ Shift ] + [ 6 ] (Prog)
[ Shift ] + [ 7 ] (Info)
[ Shift ] + [ 8 ] (System)
[ Shift ] + [ 9 ] (Config)
[ Shift ] + [ 0 ] (Pause)
[ Shift ] + [
[ Shift ] + [ CC ] (OCP)
[ Shift ] + [ CV ] (Setup)
[ Shift ] + [ CW ] (OPP)
[ Shift ] + [ Enter ] (Recall)
[ Shift ] + [ On/Off ] (Lock)
Local button is used to switch local and remote
mode.
Power on button
9
Enter the digits 0 to 9.
Decimal point
The escape key
Choose constant current mode.
Choose constant voltage mode.
Choose constant resistance mode.
Choose constant power mode.
Enter the selected value or setting.
Turns DC Load ON or OFF (OFF is high
impedance state).
Scroll up key
Scroll down key
Scroll left and right key
] (Trigger)
Copyright © Itech Electronics Co., Ltd.
Turn short circuit on or off.
Start or stop transient condition.
Set LIST operation parameters.
Store the DC Load state in non-volatile
memory.
Turn on or off battery testing function.
Enter auto test function.
Display product's Model/SN/Version.
System menu setting
Configure menu setting
Press this button if you need a pause
when runing an auto test file.
Cause an immediate trigger.
Enter OCP test function.
Set detailed
CC/CV/CW/CRmode.
Enter OPP test function.
Recall the DC Load
non-volatile memory.
Key lock function
Quick Start
parameters in
state from
9