ITech IT8500plus Series User Manual page 50

3.Press direction key to select
OCP_TEST,Press
confirm.
4,Press [Esc] button to quit menu
set
According to the following steps to escape OPP mode:
Press
mode---[Enter].
(6)Start Auto Test File
Press [
process will be auto terminated when stop conditions are reached.
(7)Recall Test File
Press [Shift]+[Enter] button to select programe file,the panel displays
"RECALL PROGRAM= 1.Enter the file name(1-10),press [Enter] button to
confirm.
If you need a pause, please press [Shift]+[0] (pause).Press [
the test.
[Enter]
[Shift]+[8] (system)---"RUNMODE"---[Eneter]----select
](trigger) to provide a signal to start auto test file.The discharing
Copyright © Itech Electronics Co., Ltd.
0.0000V 0.000A
to RUN <PROG_TEST
0.0000V 0.000A
P01
Basic Operation
"NORMAL"
] can continue
41