Spectrum Controls Micro 800 User Manual page 32

3-4 Chapter 3: Configuring the 2085sc-OF8 Using CCW
CCW
Configuration Tab
User's Manual Pub. 0300308-02 Rev. A
The Resources tab appears:
The window lists the language chosen for the module, and the module
description. You may also use this tab to access the help file provided for
the module.
5. To view default configuration information, click the Default
Configuration tab:
The enabled checkbox shown on the bottom of the tab indicates that the
module AOP provides the service for launching the MCC utility to help
you configure your module. More information is described in Setting
Configuration Parameters Using MCC, later in this section.
Before you start, if needed, install the latest version of Rockwell Automation's
Connected Components Workbench (CCW) Standard Edition.