Spectrum Controls Micro 800 User Manual page 12

1-4 Chapter 1, Module Overview
Output Description
Output Short Circuit Protection
in current mode
Output short circuit protection
in voltage mode
Resolution in current mode
Resolution in voltage mode
Field Power Input Voltage
Range
Peak Inrush Current
Current accuracy
(calibrated)
0-20 mA
4-20 mA
Voltage accuracy
(calibrated)
0-5 V
0-10 V
±10 V
Output Current Repeatability
0-20 mA
4-20 mA
Output Voltage Repeatability
0-5 V
0-10 V
±10 V
Module Scan Time (for all
analog channels)
Drive Capability
Load Reactance
Output Settling Time:
Current Output
Output Settling Time:
Voltage Output
User's Manual Pub. 0300308-02 Rev. A
Value
Current outputs are electronically current limited to 20.4 mA or
less with no damage
Output current will be limited at 15 mA
750 nA/bit
735 uV/bit
20.4 V to 26.4 V
Less than 150 mA at 5 V (backplane)
Less than 400 mA at 24 V (backplane)
Less than 900 mA at 24 V (field power)
Error at 25 °C, Max
±50.0 µA
±50.0 µA
Error at 25 °C, Max
±5.0 mV
±20.0 mV
±20.0 mV
Better than ±5.0 µA
Better than ±5.0 µA
Better than ±0.5 mV
Better than ±2.0 mV
Better than ±2.0 mV
Less than 10 ms
50 to 500 Ohm with short-circuit survival in current mode
Better than or equal to 1 kOhm in voltage mode
100 µH max in current mode
Less than 1 µF in voltage mode
Less than 2.5 ms to 63% of full scale with resistive loads
Less than 2.5 ms to 63% of full scale with resistive loads
Error over -20 °C to 65 °C, Max
±75.0 µA
±75.0 µA
Error over -20 °C to 65 °C, Max
±15.0 mV
±50.0 mV
±50.0 mV
At 25 °C
At 25 °C