Adjusting the Camera Focus
Use the supplied hexagonal wrench to remove the unit front cover fixing screws and
1.
then remove the front cover from the unit.
When removing the front cover fixing screws, perform the work carefully while supporting the front cover with
a hand so as not to drop it.
Loosen the focus fixing screws until the focus adjustment ring turns smoothly.
2.
Turn the focus adjustment ring by hand until the display image in the camera image
3.
area can be seen clearly.
Turning the ring clockwise moves the focus farther away (FAR).
Turning the ring counterclockwise moves the focus nearer (NEAR).
Tighten the focus fixing screws and check that the focus adjustment ring does not turn.
4.
Attach the front cover and front cover fixing screws to the unit.
5.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
94/113