Splitting A Work Instruction - Ricoh SC-10A Operating Instructions Manual

Splitting a Work Instruction

Split multiple work items registered to a work instruction into two work instructions.
Click the job ID below [Job ID] in the Settings menu of the [Settings] screen
1.
Click the work instruction from which to split the work items in [Works].
2.
Select the work items to split from the selected work instruction in [Work Items] and
3.
then click [Split].
The [Confirmation] screen appears.
Click [OK].
4.
The selected work items are split and a work instruction is created.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P. 34).
55/113