Storage Settings - Ricoh SC-10A Operating Instructions Manual

Storage Settings

Check information on the storage or network device being used by the device, safely remove a USB device, and connect or
disconnect a network device.
This device supports the following storage devices.
 Internal memory
 USB device
 SD card
Click [Storage] in the Settings menu of the [Settings] screen
1.
The Storage Settings screen appears.
Configure the following settings.
2.
Type
①
Mount Point
②
Total (MB)
③
Free (MB)
④
Disconnect
⑤
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
① ② ③
⑧ ②
Displays the type of device.
LOCAL: Internal memory

 USB: Displayed when a USB device is connected.
SD-CARD: Displayed when an SD card is connected.

Displays the point where the device/network drive is mounted.
Displays the total space of the device.
Displays the free space of the device.
Select a USB device in the list and then click [Disconnect] to
safely remove the USB device.
(→P.
④
⑤
⑥
⑦
⑨
34).
67/113