Matching mode parameters
If [Matching] is selected for the work mode setting when registering a inspection step
Reference Image to use for pattern matching and the number of times to retry matching when not applicable (N/A)
judgment.
Prepare a master image in advance
Click [...] of [Inspection Step Reference Image].
1.
Set the Inspection Step Reference Image.
2.
The selected Inspection Step Reference Image appears in the Inspection Step
3.
Reference Image display area.
Check that the correct image is selected.
Click the Inspection Step Reference Image.
4.
The [Inspection Step Settings] screen appears.
When the mouse is moved to the master image display area, the
Click the item to set.
5.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P.
37).
②
①
(→P.
icon appears.
③
45), set the Inspection Step
Inspection Step Reference
Image Display area
48/113