Operation; Starting Of Operation - Ricoh SC-10A Operating Instructions Manual

Operation

Starting of Operation

Start operation of a workflow using the following procedure.
Log in to the device
1.
The [User ID] input screen appears.
 The [User ID] input screen does not appear when [External Preset] or [Job Plan Preset] or [Socket Mode] is
registered or the worker ID is registered in [Internal Preset]
Enter the User ID and then click [OK].
2.
The [Job ID] input screen appears.
 The [Job ID] input screen will not be displayed in the following cases.
 [External Preset] is registered
 [Job Plan Preset] is registered
 [Socket Mode] is registered
 [Job ID] is registered in [Internal Preset]
 If [OK] is clicked without entering a job ID, the [Default] job ID is applied. You can also disable no input in
[Internal Preset]
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P. 29) or click [Start] on the Main screen
(→P. 58).
(→P. 57).
(→P. 57)
(→P. 30).
82/113