Clock Settings
Set the date and time.
Click [Date Time] in the Settings menu of the [Settings] screen
1.
The [Date Time] screen appears.
①
Select [Enable Setting].
2.
The Date Time/Regional Settings/Time Correction settings become able to be set.
Configure the following settings.
3.
Date Time
①
Regional Settings
②
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
Specify a date and time and then click [Set].
Set the location where the SC-10A is installed. Specify the
following and then click [Set].
[Area]: Select the area where the SC-10A is installed from
the pull-down list (if the area is not in the list, select the one
that is the closest).
−
Asia: Asian Continent
−
Africa: African Continent
−
America: Americas (North America, Central America,
and South America)
−
Atlantic: Atlantic Ocean Region
−
Australia: Australian Continent
−
Europe: European Continent
−
Indian: Indian Ocean Region
−
Pacific: Pacific Region
[Location]: Select the location where the SC-10A is installed
from the pull-down list (if the location is not in the list, select
the one that is the closest) containing the locations in the
selected area.
[Time Zone]: Displays the time zone corresponding to the
selected location.
(→P.
34).
②
③
70/113