Operation Logs - Ricoh SC-10A Operating Instructions Manual

Operation Logs

Executing a workflow in user mode outputs information to the log (execution information is not output in administrator
mode).
The log file (file name: sc-10_log_yyyymmdd.csv) is output to the folder specified
The log file of the most update check (file name: sc-10_log_last_check_data.csv) is also output to the same folder.
Information is recorded to the log in the following order.
Job ID
1.
Reference ID
2.
User ID
3.
Inspection Step name
4.
Inspection Step name
5.
Date
6.
Time
7.
Standard (sec)
8.
Elapsed time [sec]
9.
10. Processed items (Start, Pause, Next, Back, Log Out, change Job ID, change Reference ID, Matching, S/N, Check)
11. Judgment result (OK, fail, or N/A)
12. Final judgment result (OK, fail, or blank)
13. Image log file name
14. Comment (if one is entered in the comment field)
15. Process data (the output process data varies depending on each process.)
When matching mode:
15. Anchor Point degree of similarity
16. Anchor Point rotation angle
17. Check point ID
18. Check point degree of similarity
19. Check point rotation angle
20. Matching time [msec]
21. Color similarity
22. Texture similarity
When S/N mode:
15. Part number (set number)
16. Part serial number (value entered by user)
When check mode: None
 Please note that logs are not generated if [Do not write operation logs] in [User Mode Settings] of [Preset] is enabled.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
27) on the [Initial Settings] screen.
(→P.
91/113