Combining Work Instructions - Ricoh SC-10A Operating Instructions Manual

Combining Work Instructions

Combine two work instructions registered to a job ID into one.
Click the job ID below [Job ID] in the Settings menu of the [Settings] screen
1.
Select a work instruction you wish to combine in [Instruction Steps] and then click
2.
[Combine].
The [Target to Combine Instruction Steps] screen appears.
Select the work instruction that is the combine target and then click [OK].
3.
The [Confirmation] screen appears.
Click [OK].
4.
The selected work instructions are combined.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P. 34).
43/113