Serial Number (S/N) Input Mode Parameters - Ricoh SC-10A Operating Instructions Manual

Serial number (S/N) input mode parameters

If [S/N] is selected for the work mode setting when registering the inspection step, set the comparison target character
string and number of characters for the serial number.
Enter the serial number in [Part No.].
1.
Specify [Start Point], [Num. of Char.], and [String] in [Comparison].
2.
 For details on [Start Point]/[Num. of Char.]/[String]: [Reference ID Input Limit]
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P. 38)
53/113