Settings Screen - Ricoh SC-10A Operating Instructions Manual

Settings Screen

Select [Job Settings...] of the [Job] menu to display the [Settings] screen.
The [Settings] screen allows you to manage job IDs, create a workflow, and configure various settings.
①
Settings menu
①
Setting item
②
display area
③ Save
④ Cancel
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
Job ID:
Set the job ID (→P. 38) or workflow
 A list of the registered job IDs is displayed below [Job ID]. Select a
job ID to display the settings
Presets:
Set the preset settings for the unit
Network:
Set wired network or wireless network
Storage:
Check information on the storage device being used, safely remove a
USB device, and connect or disconnect a network device
Sound / LED Settings:
Set the beep volume and the lighting mode of the OK and fail LEDs of the
unit (→P. 69)
Date Time:
Set the date and time (→P.
Displays the setting items of the selected setting menu item.
Saves the settings.
Cancels the settings.
③
(→P. 35).
(→P. 41).
(→P. 57).
(→P. 61).
70).
②
④
(→P. 67).
34/113