Job Plan Settings - Ricoh SC-10A Operating Instructions Manual

Job Plan Settings

Set job plans for automatically switching the job ID when the workflow completes.
 The maximum number of job plans that can be loaded by this device is 1,000, but the maximum number of job plans
that can be set on this screen is 10. If you wish to set more than 10 of them, load a file that has been created
externally.
 If you edit a file that has been created externally in the [Job Plan Settings] screen, the data outside of the edit area will
be deleted, the file will be saved by overwriting.
Click [Preset] in the Settings menu on the [Settings] screen
1.
The [Preset] screen appears.
Select the [Job ID change by external file] check box of [Job Plan Preset].
2.
The [Job Plan Settings...] button is enabled.
Click [Job Plan Settings] of [Job Plan Preset].
3.
The [Job Plan Settings] screen appears.
Configure the following settings.
4.
External File
①
Add
②
Delete
③
④
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
② ③
①
⑦
Click [...] and specify the external file (CSV) to be used.
If a file name has been specified in the [Settings] screen in
advance, file name is displayed.
Add a job plan.
Delete the selected job plan.
Move the selected job plan up.
④ ⑤
(→P. 34).
⑥
80/113