Table of Contents
Advertisement
Connections
System Configuration(→P. 20)
Connect the cables while the power of the device is off.
Fix the unit to the installation location
1.
Open the HDMI connector cover on the rear of the unit.
2.
Connect the unit and monitor with an HDMI cable.
3.
Open the USB/SD connector cover on the rear of the unit.
4.
Connect the unit to a USB hub and connect a keyboard, mouse, and USB memory
5.
device to the USB hub with USB cables.
Connect to a power supply.
6.
When using the AC adapter (model including an AC adapter only):
Open the DC IN cover on the rear of the unit and connect the included AC adapter. Connect the AC adapter
and AC cord and connect to a power supply (100 V AC, 50/60 Hz).
When using an external power supply:
Open the external connector cover on the rear of the unit and connect an external cable
the external cable to a power supply (24 V or 12 V).
Connect an SD card and LAN cable if necessary.
7.
When connecting an SD card:
Open the USB/SD connector cover on the rear of the unit.
While being careful with regard to the orientation of the SD card, insert the SD card until you hear a clicking
sound.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P.
22).
(→P.
26). Connect
24/113
Hide quick links:
Advertisement
Table of Contents
