Job Related Settings - Ricoh SC-10A Operating Instructions Manual

Job Related Settings

Set strings (aliases) to related with job IDs.
 The maximum number of relates that can be loaded by this device is 1,000, but the maximum number of associations
that can be set on this screen is 10. If you wish to set more than 10 of them, load a file that has been created
externally.
 If you edit a file that has been created externally in the [Job ID Related] screen, the data outside of the edit area will be
deleted and the file will be saved by overwriting.
Click [Job ID] in the Settings menu of the [System] screen
1.
The [Job ID Management] screen appears.
Click [Job related Settings...] of [Job ID Related].
2.
The [Job related Settings] screen appears.
Configure the following settings.
3.
External File
①
Add
②
Delete
③
④
⑤
Related list display
⑥
area
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
②
③
①
⑥
Click [...] and specify the external file (CSV) to be used.
If a file name has been specified in the [Settings] screen in
advance, file name is displayed.
Add an association list.
Delete the selected association list.
Move the selected association list up.
Move the selected association list down.
Set strings (aliases) to associate with job IDs.
 [Job ID]: Specify the job IDs to associate.
This is not case sensitive. If there is an error with the input,
the input area is displayed in red.
④ ⑤
(→P. 34).
78/113