Network Settings - Ricoh SC-10A Operating Instructions Manual

Network Settings

Set the network to be used.
Click [Network] in the Settings menu of the [Settings] screen
1.
The Select Network Device screen appears.
Select [Wired Network] or [Wireless Network] in [Active].
2.
A wired network and wireless network cannot be used at the same time.

 If you change the settings, the settings cannot be restored by clicking [Cancel].
 Configure the settings of the selected network connection.
 Wired network settings(→P. 62)
 Wireless network settings(→P. 63)
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P. 34).
Displays the IP
address.
Displays the log.
61/113