Logging In - Ricoh SC-10A Operating Instructions Manual

Logging In

The Login screen appears when the device starts up (after configuring the initial setting at first startup).
Select [Administrator Mode] or [User Mode].
1.
 To create a workflow and set parameters, select [Administrator Mode].
 If you log in with [User Mode], you will only be able to operate a workflow
When [Administrator Mode] is selected, enter the password in [Password].
2.
 Enter the password set in [Password] of the [Initial Settings] screen
 The initial password is "root."
Click [Login].
3.
 When [Administrator Mode] is selected, [Login] is not displayed until the password is entered in [Password].
 When you log in, the [Worker ID] input screen appears
 When the following items are set, the login screen will not be displayed when starting the application.
 Operation is the same as when [Job ID change by external input] of [External Preset]
 Operation is the same as when [Job ID change by external input] of [External I/O Settings...]
 Select the [Job ID change by external file] check box of [Job Plan Preset]
 Select the [Socket Mode] check box of [Enabling the Socket Mode]
 If [Do not display the login dialog] is selected in [Internal Preset], the login screen will not be displayed when starting
the application (→P.
 The user mode is enabled when the login screen is not displayed.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
57).
(→P. 82).
(→P. 27).
(→P. 82).
(→P. 58).
(→P. 57).
(→P. 73).
29/113