Adjusting The Parameter Settings While Workflow Stopped - Ricoh SC-10A Operating Instructions Manual

Adjusting the Parameter Settings While Workflow Stopped

The parameter settings of the workflow can be adjusted while the workflow is stopped. Adjustment is not possible when in
user mode.
 The settings can be changed by selecting [Job Settings...] from the [Job] menu while the workflow is stopped
Click [Settings...] on the Workflow Stopped screen
1.
Adjust the parameters.
2.
Parameter adjustment during matching mode operation:
Click the thumbnail in [Anchor Point] or [Check Point] in the work mode area
the parameter settings dialog box.
Parameter setting dialogs:
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(→P.
Anchor Point
86).
(→P. 30) on the main screen to open
(→P. 34).
88/113