Operation Workflow - Ricoh SC-10A Operating Instructions Manual

Operation Workflow

This manual describes how to install, set, and operate this device using the following workflow.
Installation
Install the device and configure the initial settings.
STEP 1: Installation and Connections
Install the device and connect the cables.
 Installation and Connections(→P. 20)
STEP 2: Power-on and Initial Settings
Turn on the power and configure the initial settings.
Power-on and Initial Settings(→P. 27)

Settings (Administrator Mode)
Log in to the device, create a workflow, and configure various settings.
STEP 1: Logging In
Log in to the device.
Logging In(→P. 29)

STEP 2: Creating a Workflow
Register the job ID, work instructions, Instruction Step File, inspection
steps, and work mode to create a workflow.
 Creating a Workflow(→P. 35)
STEP 3: Other Settings
Configure various settings.
 Settings(→P. 57)
Operation User Mode) / Adjustments
(
Operate or stop the workflow and make adjustments to the parameters.
Operation(→P. 82)

RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
(Administrator Mode)
Creating the work
instruction image
Create the work
instruction image with
Work Instructions Editor.
For details, refer to "SC-
10 Series Work
Instructions Editor User's
Guide."
19/113