Socket Mode Function Settings - Ricoh SC-10A Operating Instructions Manual

Socket Mode Function Settings

To use Socket Mode, configure the settings of the Socket Mode function.
Click [Socket Mode] of [Network] in the Settings menu of the [Settings] screen
1.
①
②
③
①
⑥
⑦
⑧
Configure the following settings.
2.
Enabling the Socket
①
Mode
Destination IP
②
Address
Destination Port
③
Device ID
④
Device name
⑤
Debug Mode
⑥
Log display area
⑦
Data transmission
⑧
function
Save Log
⑨
 For details, refer to the Socket Mode Function Operating Instructions of the SC-10 series.
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
Selecting the check box enables the Socket Mode function.
Specify the destination IP address of Socket Mode.
Specify the destination port number of Socket Mode. The initial
setting is 56109.
Displays the device ID (set automatically by the system).
Specify any name.
Selecting the check box enables the Debug Mode of the Socket
Mode function.
Displays the logs of messages used in the Socket Mode function.
Transmits the messages used in the Socket Mode function from
the SC-10A to another system.
Saves the messages in the log display area.
(→P. 34).
④
⑤
⑨
65/113