Operation Screen; Main Screen During Operation - Ricoh SC-10A Operating Instructions Manual

Operation Screen

The following explanation uses the example of the screen when the inspection step is matching mode.

Main screen during operation

①
②
③
④
0/1 Instruction
①
Step
0/1 Inspection
②
Step
Instruction
③
Step File area
Stop
④
Work time
⑤
information
Camera image
⑥
area
Inspection
⑦
Step display
area
RICOH SC-10 SERIES
Operating Instructions Rev. 4.00
Displays the rate of progress of the entire work instruction in a progress
bar.
"0/1" indicates "No. of executions completed/Total number."
Displays the rate of progress of the entire inspection step in a progress bar.
"0/1" indicates "No. of executions completed/Total number."
Displays the Instruction Step File set for the workflow.
(→P.
Stops the workflow
Displays the following information.
[Standard Time]: Displays the set standard time.
[Elapsed time]: Displays the elapsed time. The progress bar is displayed in
blue up to the standard time. It is displayed in yellow from the standard time
to the time limit. If the upper time limit is exceeded, it is displayed in red.
[Delayed]: Displays the delay time.
Displays the camera image.
During matching mode execution, the matching result is displayed as a
thumbnail in [Anchor Point] and [Check Point], and one of the following is
displayed in [Result].
86).
⑤
⑥
⑦
⑧
84/113