Mitsubishi Electric MELSEC iQ-F Series User Manual page 86

■[Chassis] tab
Set the modules to be mounted in each slot for EtherNet/IP devices to which modules can be mounted.
Item
Chassis Type [Set Chassis Size in the Module]
Available in the button
Device Library
[Get Chassis Size in the Module]
button
Available Modules for the Chassis
Configured Modules
8 EtherNet/IP Configuration Tool for FX5-ENET/IP
84
8.1 Window Structure
Description
Selects the number of slots to which modules can be mounted.
For the setting range and the default value, refer to the manuals of the EtherNet/IP device.
Displays a list of the modules that can be mounted to the EtherNet/IP device.
This content varies depending on the EtherNet/IP device.
Select a module and click the [→] button to add the module to the list of "Configured Modules".
(When the module is added to the list by a drag-and-drop operation, it can be added to a desired slot.)
Sets the modules of the EtherNet/IP device for each "Slot" number.
Select a module and edit it with the following buttons.
• [↑] button: Moves the selected module to the upper slot.
• [↓] button: Moves the selected module to the lower slot.
• [] button: Deletes the selected module.