Setting Target Instance - Mitsubishi Electric MELSEC iQ-F Series User Manual

Setting Target Instance

If the FX5-ENET/IP is set as the target of the EtherNet/IP communication, select "Target (Class1 Instance)", and drag and
drop it to the Network configuration setting.
Item
Device Designation
Assembly Instance(T-
>O)
Assembly Instance(O-
>T)
*1 Characters from A to Z, numbers from 0 to 9, "." (dot), "-" (hyphen), and "_" (underscore) can be used. For the first character of a name,
only characters from A to Z can be used.
8 EtherNet/IP Configuration Tool for FX5-ENET/IP
96
8.1 Window Structure
Description
Device Name Sets the name to use in management with EtherNet/IP Configuration
Tool for FX5-ENET/IP.
By default, names of EtherNet/IP devices not registered in the network
configuration setting are displayed in the form such as "DEVICE-A" and
"DEVICE-B".
Number Sets the control number of the EtherNet/IP device.
The control number that has not been set for EtherNet/IP devices can
be selected from the list.
Active Configuration Enables or disables the parameters set for the EtherNet/IP device on
the FX5-ENET/IP.
• Selected: Enabled
• Not selected: Disabled
Disable this item when the parameters of the EtherNet/IP device need
to be deleted from the FX5-ENET/IP with the settings in EtherNet/IP
Configuration Tool for FX5-ENET/IP held.
Comment Displays the comment input field.
Connection No Displays the connection number of the EtherNet/IP device.
Connection numbers of EtherNet/IP devices are assigned from 1 in the
order in which they were added.
Instance Specifies the instance number used in Class1 instance
communications (T->O).
Size Specifies the data size of used in Class1 instance communications
(Unit: byte).
Instance Specifies the instance number used in Class1 instance
communications (O->T).
Size Specifies the data size of used in Class1 instance communications
(Unit: byte).
Setting range
*1
Up to 50 characters
(Default: Refer to the left.)
000 to 255
(Default: Minimum value of
the control numbers of
EtherNet/IP devices that
have not been set.)
• Selected
• Not selected
(Default: Selected)
Up to 255 single-byte
characters
(Default: Blank)

100 to 199
(Default: 101)
1 to 1444
(Default: 256)
100 to 199
(Default: 102)
1 to 1444
(Default: 256)