Mitsubishi Electric MELSEC iQ-F Series User Manual page 114

Programmable controller
Hide thumbs Also See for MELSEC iQ-F Series:
Table of Contents

Advertisement

Status of Each Connection
The status of each connection of the FX5-ENET/IP selected.
[Diagnostics]  [Ethernet Diagnostics]  Select the "Module" in the [Target Module Specification].  Select the [Status
of Each Connection] tab.
Item
Connection No./Function
Host Station Port No.
Communication Destination Communication Method
Communication Destination IP Address
Communication Destination Port No.
Latest Error Code
Protocol
Open System
TCP Status
Remote Password Status
Continuous Unlock Lost Counts
Click the [Clear Latest Error Code] button to clear all the errors displayed in "Latest Error Code" of each connection.
10 TROUBLESHOOTING
112
10.2 Checking the Module Status
Description
Displays the connection number and functions.
Displays the own station port number used.
Displays the communication method.
Displays the IP address of the sensor/device to be connected, which is set in the parameter
settings.
Displays the port number of the sensor/device to be connected, which is set in the parameter
settings.
Displays the error code that indicates the definition of latest error occurred.
Displays the protocol (TCP/IP or UDP/IP).
Displays the open method (Active, Unpassive, or Fullpassive) when the protocol of the connection
is TCP/IP.
Displays the status (open status) of connection with the sensor/device when the protocol of the
connection status is TCP/IP.
Not supported.
Not supported.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx5-enet/ip

Table of Contents