Mitsubishi Electric MELSEC iQ-F Series User Manual page 144

IP address storage area clear error code
■IP address storage area clear error code (Un\G62)
Stores error codes if clearing of IP address storage area fails.
• 0: Normal (no error)
• 1921H: 'IP address storage area write request' (Un\G56) and 'IP address storage area clear request' (Un\G58) were
simultaneously turned off and on.
IP address
■IP address (Un\G64 to Un\G65)
Stores IP address on the own station set with GX Works3. (Page 50 Basic Setting) The stored values can be changed by
the IP address change function.
Address Description
Un\G64 3rd octet, 4th octet
Un\G65 1st octet, 2nd octet
Ex.
When IP address is 192.168.3.250: Un\G64 = K003250, Un\G65 = K192168
If the IP address is changed by the IP address change function, priority will be given to the IP address stored
by the IP address change function. To enable the set value in GX Works3, clear the IP address storage area.
Subnet mask pattern
■Subnet mask pattern (Un\G74 to Un\G75)
Stores subnet mask pattern on the own station set with GX Works3. (Page 50 Basic Setting) The stored values can be
changed by the IP address change function.
Address Description
Un\G74 3rd octet, 4th octet
Un\G75 1st octet, 2nd octet
If the subnet mask pattern is changed by the IP address change function, priority will be given to the subnet
mask pattern stored by the IP address change function. To enable the set value in GX Works3, clear the IP
address storage area.
Ex.
When subnet mask pattern is 255.255.255.0: Un\G74 = K255000, Un\G75 = K255255
APPX
142
Appendix 4 Buffer Memory