Mitsubishi Electric MELSEC iQ-F Series User Manual page 73

■[Port Configuration] tab
Read and write the connection status of the EtherNet/IP device.
This tab can be used when the "Online Action" window is displayed with an EtherNet/IP device selected.
Item
[Get Values from Device] button
Physical Interface Instance
[Refresh] button
Set Part of Values
[Set Values to Device] button
[Set All Values to Device] button
Description
[Set Chassis Size in the Device] button
Description
Reads and displays the connection status of the EtherNet/IP device.
Specifies the port number from the list when the EtherNet/IP device is configured with multiple ports.
Updates the port number of the "Physical Interface Instance".
Selects the items of the values to write to the EtherNet/IP device from the following.
• General Parameters: Basic parameter settings
• TCP/IP Parameters: TCP/IP parameter settings
• Device Name: Device name settings
• Physical Interface: Physical interface settings
Writes the values of the items selected with "Set Part of Values" to the EtherNet/IP device.
Writes all the values of the displayed connection status to the EtherNet/IP device.
Displays the description of the selected item.
Sets the number of modules to be mounted to the slice-type EtherNet/IP device.
Writing the specified number of modules enables error detection when the specified number is different
from that of the actual system or when an error occurs on the module.
8 EtherNet/IP Configuration Tool for FX5-ENET/IP
8.1 Window Structure
8
71