Mitsubishi Electric MELSEC iQ-F Series User Manual page 34

Setting method
For Class1 instance communications, set the originator and target on the FX5-ENET/IP on the scanner side.
■Originator (on scanner side) settings
Under "Basic Setting" in the GX Works3, set the IP address, subnet mask, and default gateway of the FX5-ENET/IP.
[Navigation window]  [Parameter]  [Module Information]  [FX5-ENET/IP]  [Basic Setting]
For details on the setting window, refer to the following.
Page 50 Basic Setting
■Target (on adapter side) settings
After registering the EtherNet/IP device with EtherNet/IP Configuration Tool for FX5-ENET/IP, set the adapter side for each
connection.
For details on registering EtherNet/IP devices, refer to the following.
Page 98 Procedure for Registering EtherNet/IP Devices
Select the EtherNet/IP device in the network configuration settings  [Device]  [Properties]  [Connections] tab
(1) Input data size
(2) Trigger type
(3) RPI
(4) Output data size
(5) RPI
For details on the setting window, refer to the following.
Page 85 [Connections] tab
4 FUNCTION
32
4.2 EtherNet/IP Communication Functions
(1)
(2)
(3)
(4)
(5)