Trane TR200 Programming Manual page 52

0-31 Custom Readout Min Value
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
0-32 Custom Readout Max Value
Range:
100.00 [Application dependant]
Custom-
Readou-
tUnit*
0-37 Display Text 1
Range:
0 N/A* [0 - 0 N/A]
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
TR200 Programming Guide
Function:
Function:
This parameter sets the max value to be shown when the speed of the
motor has reached the set value for par.4-13
[RPM] or par.4-14 Motor Speed High Limit [Hz]
par.0-02 Motor Speed Unit).
Function:
In this parameter, it is possible to write an individual text string for dis-
play in the keypad or to be read via serial communication. If it is to be
displayed permanently, select Display Text 1 in par.0-20
Small, par.0-21 Display Line 1.2
par.0-23 Display Line 2 Large
or buttons on the keypad to change a character. Use the
buttons to move the cursor. When a character is highlighted by the cur-
sor, it can be changed. Use the
a character. A character can be inserted by placing the cursor between
two characters and pressing
Function:
In this parameter, it is possible to write an individual text string for dis-
play in the keypad or to be read via serial communication. If to be
displayed permanently select Display Text 2 in par.0-20
Small, par.0-21 Display Line 1.2
par.0-23 Display Line 2 Large
or buttons on the keypad to change a character. Use the
buttons to move the cursor. When a character is highlighted by the cur-
sor, this character can be changed. A character can be inserted by placing
the cursor between two characters and pressing
Parameter Description
Motor Speed High Limit
(depends on setting in
Display Line 1.1
Small, par.0-22 Display Line 1.3
or par.0-24 Display Line 3 Large. Use the
or buttons on the keypad to change
or .
Display Line 1.1
Small, par.0-22 Display Line 1.3
or par.0-24 Display Line 3 Large. Use the
or .
Small,
and
Small,
and
4-15