Trane TR200 Programming Manual page 44

[1] Set-up 1
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
0-13 Readout: Linked Set-ups
Array [5]
Range:
0 N/A* [0 - 255 N/A]
0-14 Readout: Prog. Set-ups / Channel
Range:
0 N/A* [-2147483648 -
2147483647 N/A]
0-2* keypad Display
Define the variables displayed in the Graphical Local Control Panel.
NOTE
Refer to par.0-37 Display Text
display texts.
0-20 Display Line 1.1 Small
Option:
[0] None
TR200 Programming Guide
Function:
View a list of all the set-ups linked by means of par.0-12
Linked to. The parameter has one index for each parameter set-up. The
parameter value displayed for each index represents which set-ups are
linked to that parameter set-up.
Index
0
1
2
3
4
Table 4. 2: Example: Set-up 1 and Set-up 2 are linked
Function:
View the setting of par.0-11
different communication channels. When the number is displayed in
hex, as it is in the keypad, each number represents one channel.
Numbers 1-4 represent a set-up number; 'F' means factory setting; and
'A' means active set-up. The channels are, from right to left: keypad, Ad-
justable Frequency Drive bus, USB, HPFB1.5.
Example: The number AAAAAA21h means that the Adjustable Frequen-
cy Drive bus selected Set-up 2 in par.0-11
keypad selected Set-up 1 and all others used the active set-up.
1, par.0-38 Display Text 2 and par.0-39
Function:
Select a variable for display in line 1, left position.
No display value selected
Parameter Description
keypad value
{0}
{1,2}
{1,2}
{3}
{4}
Programming Set-up for each of the four
Programming
Display Text 3 for information on how to write
This Set-up
Set-up, the
4-7