Trane TR200 Programming Manual page 156

[3] Select set-up 2
[4] Select set-up 3
[5] Select set-up 4
[10] Select preset ref 0
[11] Select preset ref 1
[12] Select preset ref 2
[13] Select preset ref 3
[14] Select preset ref 4
[15] Select preset ref 5
[16] Select preset ref 6
[17] Select preset ref 7
[18] Select ramp 1
[19] Select ramp 2
[22] Run
[23] Run reverse
[24] Stop
[26] Dcstop
[27] Coast
[28] Freeze output
[29] Start timer 0
[30] Start timer 1
[31] Start timer 2
[32] Set digital out A low
[33] Set digital out B low
[34] Set digital out C low
[35] Set digital out D low
[36] Set digital out E low
[37] Set digital out F low
[38] Set digital out A high
[39] Set digital out B high
TR200 Programming Guide
Changes the active set-up (par.0-10
Changes the active set-up (par.0-10
Changes the active set-up (par.0-10
changed, it will merge with other set-up commands coming from either
the digital inputs or via a serial communication bus.
Selects preset reference 0.
Selects preset reference 1.
Selects preset reference 2.
Selects preset reference 3.
Selects preset reference 4.
Selects preset reference 5.
Selects preset reference 6.
Selects preset reference 7. If the active preset reference is changed, it will
merge with other preset reference commands coming from either the
digital inputs or via a serial communication bus.
Selects ramp 1
Selects ramp 2
Issues a start command to the adjustable frequency drive.
Issues a start reverse command to the adjustable frequency drive.
Issues a stop command to the adjustable frequency drive.
Issues a DC stop command to the adjustable frequency drive.
The adjustable frequency drive coasts immediately. All stop commands
including the coast command stop the SLC.
Freezes the output frequency of the adjustable frequency drive.
Starts timer 0, see par.13-20
Starts timer 1, see par.13-20
Starts timer 2, see par.13-20
Any output with 'digital output 1' selected is low (off).
Any output with 'digital output 2' selected is low (off).
Any output with 'digital output 3' selected is low (off).
Any output with 'digital output 4' selected is low (off).
Any output with 'digital output 5' selected is low (off).
Any output with 'digital output 6' selected is low (off).
Any output with 'digital output 1' selected is high (closed).
Any output with 'digital output 2' selected is high (closed).
Parameter Description
Active Set-up) to '2'.
Active Set-up) to '3'.
Active Set-up) to '4'. If the set-up is
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
4-119