Trane TR200 Programming Manual page 173

Parameter Description
15-23 Historic Log: Date and Time
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
15-3* Alarm Log
Parameters in this group are array parameters, where up to 10 fault logs can be viewed. [0] is the most recent
logged data, and [9] the oldest. Error codes, values and time stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Array [10]
Range:
0 N/A* [0 - 255 N/A]
15-31 Alarm Log: Value
Array [10]
Range:
0 N/A* [-32767 - 32767 N/A]
15-32 Alarm Log: Time
Array [10]
Range:
0 s* [0 - 2147483647 s]
15-33 Alarm Log: Date and Time
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
15-4* Drive Identification
Parameters containing read only information about the hardware and software configuration of the adjustable
frequency drive.
15-40 FC Type
Range:
0 N/A* [0 - 0 N/A]
4-136
Function:
Function:
View the error code and look up its meaning in the
ter.
Function:
View an extra description of the error. This parameter is mostly used in
combination with alarm 38 'internal fault'.
Function:
View the time when the logged event occurred. Time is measured in
seconds from adjustable frequency drive start-up.
Function:
Function:
View the FC type. The readout is identical to the adjustable frequency
drive series power field of the type code definition, characters 1-6.
Troubleshooting
chap-
TR200 Programming Guide