Main Menu - Data Readouts - Group 16 - Trane TR200 Programming Manual

Parameter Description

Main Menu - Data Readouts - Group 16

16-** Data Readouts
Parameter group for data readouts, such as current references, voltages, control, alarm, warning and status
words.
16-0* General Status
Parameters for reading the general status, such as the calculated reference, the active control word and status.
16-00 Control Word
Range:
0 N/A* [0 - 65535 N/A]
16-01 Reference [Unit]
Range:
0.000 [-999999.000 - 999999.000
Referen- ReferenceFeedbackUnit]
ceFeed-
backU-
nit*
16-02 Reference %
Range:
0.0 %* [-200.0 - 200.0 %]
16-03 Status Word
Range:
0 N/A* [0 - 65535 N/A]
16-05 Main Actual Value [%]
Range:
0.00 %* [-100.00 - 100.00 %]
16-09 Custom Readout
Range:
0.00 [-999999.99 - 999999.99
Custom- CustomReadoutUnit]
Readou-
tUnit*
4-140
Function:
View the control word sent from the adjustable frequency drive via the
serial communication port in hex code.
Function:
View the present reference value applied on impulse or analog basis in
the unit resulting from the configuration selected in par.1-00
tion Mode (Hz, Nm or RPM).
Function:
Function:
View the status word sent from the adjustable frequency drive via the
serial communication port in hex code.
Function:
View the two-byte word sent with the status word to the bus master re-
porting the main actual value.
Function:
View the user-defined readouts as defined in par.0-30
Unit, par.0-31 Custom Readout Min Value
Max Value.
Configura-
Custom Readout
and par.0-32 Custom Readout
TR200 Programming Guide