Trane TR200 Programming Manual page 149

Parameter Description
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Timeout 3
[71] SL Timeout 4
[72] SL Timeout 5
[73] SL Timeout 6
[74] SL Timeout 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
4-112
Use the value of DI33 in the logic rule (High = TRUE).
This logic rule is TRUE if the adjustable frequency drive is started by any
means (either via digital input, serial communication bus or other).
This logic rule is TRUE if the adjustable frequency drive is stopped or
coasted by any means (either via digital input, serial communication bus
or other).
This logic rule is TRUE if the adjustable frequency drive is tripped (but
not trip-locked) and the reset button is pressed.
This logic rule is TRUE if the adjustable frequency drive is tripped (but
not trip-locked) and an automatic reset is issued.
This logic rule is TRUE if the OK key on the keypad is pressed.
This logic rule is TRUE if the Reset key on the keypad is pressed.
This logic rule is TRUE if the Left key on the keypad is pressed.
This logic rule is TRUE if the Right key on the keypad is pressed.
This logic rule is TRUE if the Up key on the keypad is pressed.
This logic rule is TRUE if the Down key on the keypad is pressed.
Use the result of comparator 4 in the logic rule.
Use the result of comparator 5 in the logic rule.
Use the result of logic rule 4 in the logic rule.
Use the result of logic rule 5 in the logic rule.
Use the result of timer 3 in the logic rule.
Use the result of timer 4 in the logic rule.
Use the result of timer 5 in the logic rule.
Use the result of timer 6 in the logic rule.
Use the result of timer 7 in the logic rule.
TR200 Programming Guide