Trane TR200 Programming Manual page 143

Parameter Description
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
13-02 Stop Event
Option:
[0] * FALSE
[1] TRUE
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
4-106
Use the value of DI19 in the logic rule (High = TRUE).
Use the value of DI27 in the logic rule (High = TRUE).
Use the value of DI29 in the logic rule (High = TRUE).
Use the value of DI32 in the logic rule (High = TRUE).
Use the value of DI33 in the logic rule (High = TRUE).
This event is TRUE if the adjustable frequency drive is started by any
means (either via digital input, serial communication bus or other).
This event is TRUE if the adjustable frequency drive is stopped or coasted
by any means (either via digital input, serial communication bus or oth-
er).
This event is TRUE if the adjustable frequency drive is tripped (but not
trip-locked) and the reset button is pressed.
This event is TRUE if the adjustable frequency drive is tripped (but not
trip-locked) and an automatic reset is issued.
This event is TRUE if the OK key on the keypad is pressed.
This event is TRUE if the Reset key on the keypad is pressed.
This event is TRUE if the Left key on the keypad is pressed.
This event is TRUE if the Right key on the keypad is pressed.
This event is TRUE if the Up key on the keypad is pressed.
This event is TRUE if the Down key on the keypad is pressed.
Use the result of comparator 4 in the logic rule.
Use the result of comparator 5 in the logic rule.
Use the result of logic rule 4 in the logic rule.
Use the result of logic rule 5 in the logic rule.
Function:
Select the Boolean (TRUE or FALSE) input to deactivate Smart Logic
Control.
Enters the fixed value of FALSE in the logic rule.
Enters the fixed value TRUE in the logic rule.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
TR200 Programming Guide