Table of Contents
Advertisement
(Main Menu > Configure > Setup > Edit Setup > General > Localisation)
Set up the recorder for native language use and global settings including:
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
(Main Menu > Configure > Setup > Edit Setup> General > Factory)
The Factory menu contains information on the Firmware Credit System, Upgrading the re-
corder Firmware, CJC and Analogue Input Card Calibration, Demo Traces, Reset Setup
function and a Production only menu.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Localisation
• Language - Select native language menu prompts from list.
• Help Language - Select native language for Help Files, currently English only availa-
ble.
• Time Zone - Select the corresponding time zone from the drop down list.
• Daylight Saving - Toggle On or Off to activate daylight saving, if applicable. When the
time zone is selected and daylight saving is active the recorder will change the daylight
saving hour automatically. The date this occurs depends on the time zone selected.
Some time zones do not have daylight saving. Data being recorded will be affected,
either with a 1 hour gap of data or a 1 hour overlap of data.
• Temp.Units - Select the Temperature Units that the recorder is set to for temperature
measurement. Pen scale units may need to be changed accordingly. See Pen Scale.
• Line Hz – Toggle between 50Hz or 60Hz. Mains power frequency. Used to optimise
analogue input filtering. Note: The default value is set based on the model number but
can be changed here.
Factory
• Credits - The Credit menu contains the Serial no. of the recorder, how many credits are
available, displays the Options Code and lists what Firmware Options are currently
See "Credits" on page 92
active.
Power up
91
Advertisement
Table of Contents
