*Specification table for Sterilisation: The definition of Fo/Po is the sterilisation/pasteurisation time in minutes required to destroy a stated number

of organisms with a known z at temperature T. For example, "F18/250" represents the time in minutes required to destroy a stated number of

organisms at a temperature of 250°F (121.11°C) with a z = 18 degrees F. F values are used to compare the sterilizing values of different proc-

esses, however, F values cannot be compared unless the z values are the same. When temperature is not specified (for example, F = 8.6) it

is understood that the temperature is 250°F (121.11°C); the subscript O (as in the term Fo = 7.4) is used to indicate that the z = 18 degrees F

and the temperature is 250°F (121.11°C).

Specification

Parameter

Ambient Temperature

Relative Humidity (%RH)

Vibration

Frequency (Hz)

Acceleration (g)

43-TV-25-35 GLO Iss.4 Dec 06 UK

A5E01001767-04

Specification Tables

Setup email accounts to send the following: When an Alarm is triggered or an Email can be sent as a part

of an Event occurring, such as: Alarms - In/Out/Ack , Totaliser – Start, Stop or Reset, Digital Inputs – On,

Off or State change, TC Burnout – on a specific Analogue Input channel, Scheduled Events – Once, Inter-

val, Specific days, Month End.

2 or 4 re-transmission outputs available for the D300 Recorder and 2, 4, 6 or 8 re-transmission outputs

available for the D400 Recorder; a pen drives each output. Analog inputs, totalised values or any mathe-

matical result can be re-transmitted.

Update Rate: 250 msec all channels

Type: 0 to 20 / 4 to 20 mA

Resolution: 0.002%

The recorder keeps track of important "life actions" for improved diagnostics and preventative mainte-

nance notification. Including Powered On, Last powered On, Time On since power up, Total On time, Total

Off time, Longest Off time, Lithium cell life, Backlight life left at 100% brightness, Hi/Lo CJC value (Hi & Lo

temps), Analogue In last factory/user cal, Relay operations, last configuration change.

CSA (Optional) CSA22.2-No.1010.1-2004 Certificate Number 211230. UL (Optional) ANSI/UL61010-1-

2004 File # 201698. FM Class 1 Division 2 (optional). FM not available for the D200

Provides full support for 21 CFR Part 11. Includes features for entry of unique User ID's and associated

passwords, timeout on inactivity (1 to 10 min.), password expiration (1 to 365 days), up to 50 users, pass-

word re-entry lock out for incorrect entry of password more than 3 times, no re-use of passwords (pro-

grammable 4 to 12 times), traceability by user name

One totaliser per pen. Totaliser value must be assigned to a pen for display and storage. Multiple totalisa-

tions (Maths option) are possible with the use of extra pens (option). Reset may be manual or pro-

grammed (Event option). Totalisation values are ten digits plus exponent.

Each pen can be totalised according to the Fo or Po sterilisation* function at 250 °F (121.11°C). The

Standard Reference Temperature and Thermal Resistance (Z Value) are fully adjustable values of X, Y, W

and V. Start temp, Reference temp and Z factor are all user defined, allowing support for many different

types of sterilisation applications.

The Batch function allows the user to segment portions of data for further analysis. Batch enhances the

management of data collected in non-continuous process, known as batch processing.

Enables the printer option to print from various Status screens using a basic USB standard PCL (Printer

Command Language) printer.

All analog input channels have a math expression text block. This is a fully user programmable 100 char-

acter free form math expression for each pen. Math calculations available on all pens, one per input plus

16 extra pens for the D300, 48 extra pens for the D400 recorder. and 12 extra pens for the D200. Scripting

maths includes conditions and multi-line scripting in pen maths expressions. Allow functions, permanent

variables, constants and timers. 500 characters maximum. (Scripting is not available on the D200)

Optional customer ID Tagging (3 lines of up to 22 characters each line)

Environmental and Operating Conditions

Reference

67 °F to 77 °F

19 °C to 25 °C

50 to 65*

Options

Accuracy: ±0.1% 0-500

Maximum Load Resistance: 1000 Ohms

Isolation: 300VAC

Rated

Extreme

32 °F to 122 °F

0 °C to 50 °C

10 to 90*

5 to 90*

0 to 70

0 to 100

0.1

0.2

load, +/-0.25% 500

load

Transport & Stor-

age

14 °F to 140 °F

–10 °C to 60 °C

5 to 95*

0 to 100

0.5

229

Table of Contents

This manual is also suitable for:

Sirec d300 Sirec d400

Siemens SIREC D200 Manual page 235

Related Manuals for Siemens SIREC D200

Related Products for Siemens SIREC D200

This manual is also suitable for:

Table of Contents