Table of Contents
Advertisement
Figure 4.7 on page 78
server and a client in the middle and a string of client recorders at the bottom. A recorder
can be set up to be a server and a client. Setting it as both means this recorder will synchro-
nise time with the network server. But will also allow other recorders to time sync with it. This
saves many recorders trying to time sync with the network server.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
(Main Menu > Configure > Setup > Edit Setup > Comms > Comms Services > FTP)
This is a method of transferring data and setups to and from SIREC D software and the
recorder.
Refer to
software manual for setting up FTP transfer.
78
• Period - Only available when Client Enable is active. Select and enter the time period in
seconds required between checking and updating the time using the on-screen key-
board. This will default to 120 seconds.
• Threshold - Only available when Client Enable is active. This is a specified amount of
time (in seconds) that the recorder clock must be within to ensure synchronisation with
the network server. Eg. if set to 3600 the recorder time must be within 1 hour of the net-
work server to ensure time sync will take place.
Figure 4.7 Client/Server network
Client/Server Network
shows a Network Server at the top, a recorder acting as both a
FTP (File Transfer Protocol)
• Enabled - Tick to enable FTP transfer
• Allow Upload - Tick to allow FTP transfer from
• Allow Download - Tick to allow FTP transfer from the recorder to
ware
.
• Log Messages - Tick to add a message to the messages list when an FTP transfer is
performed
• Mark Chart - Can only be active when Log Messages is enabled. Tick to mark the chart
when an FTP transfer is performed.
"Section 8: Communication" on page 171
Power up
When using time synchronisation
via SNTP, always make sure that
the recorders and the PC if any
are configured to the same time
zone.
See "Localisation" on
page 91
SIREC D software
to the recorder.
SIREC D soft-
in this manual and the SIREC D
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
