Table of Contents
Advertisement
Safety
The SIEMENS range of instruments is compliant with the requirements of BS EN 61010-
1:2001 "Safety Requirements for Electrical Equipment for Measurement, Control and Labo-
ratory Use" and UL 61010C-1 and CSA 22.2-1010.1, as options. If the equipment is used in
a manner not specified, the protection provided by the equipment may be impaired.
The SIEMENS range of instruments is compliant to the requirements for Class 1, Div.2 Haz-
ardous (Classified) Locations.
Symbols
One or more of the following symbols may appear on the recorder labelling.
Static Electricity
All circuit boards and electronic modules associated with this recorder contain components
which are susceptible to damage caused by electrostatic discharge. Should it be necessary
to handle such components, appropriate precautions in accordance with ANSI/ESD S20.20
Electrostatic Discharge Control Program Standard, should be observed.
2
Safety
Table 1.2 : Safety Symbols
Symbol
Meaning
Caution - refer to manual for
instructions
Caution - risk of electric
shock
Direct Current
Protective conductor terminal
Earth (ground) terminal
Static Electricity
Directive 2002/96/EC
WEEE: Waste Electrical and
Electronic Equipment
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
