Appendix D: Alarms; Alarms Menu - Siemens SIREC D200 Manual

Appendix D: Alarms

Alarms Menu

(Main Menu > Alarms >)
Acknowledge, Configure and View alarms from this menu.
Acknowledging Alarms
User acknowledgment of alarms can be performed at this menu, only latched alarms can be
acknowledged.
If a latched alarm is set up in the Pen, Alarms menu then a latched relay will maintain in its
active state until the trigger source has returned to a no alarmed state and the alarm has
been acknowledged.
A latched alarm will continue to flash, if an alarm marker is displayed, until it is acknowl-
edged and in a non-alarm state.
tification.
This will display all available Pens with alarms set up.
To change the configuration, select the desired pen, this will display the alarm details.
Select the Edit button to change the alarm level.
If the Edit button is greyed-out go to the
alarm, then activate Allow Change.
This will display all available Pens with alarms set up. To view the configuration, select the
desired pen, this will display the alarm details.
When complete go to Finish to commit the new set up.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Ack Alarm
• All - Select this button to acknowledge all active alarms, latched and normal alarms.
• By Group - Select this button to acknowledge any alarms in a group of pens. Pen groups
can be set up in the Pens menu
• By Pen - Select this option to acknowledge any alarms for individual pens.
Configure
View
See "Alarm Markers" on page 162
"Alarms Menu" on page 66
for flash colour iden-
menu and select the
251