Table of Contents
Advertisement
In summary Cause 1 or Cause 2 will trigger Effect 1 and Effect 2.
When selecting Totalisers and Alarms etc. ensure they are enabled and configured in the
Pens menu.
80
Power up
NOTICE
Remember that either Cause 1 OR Cause 2 will trigger Effect 1 AND Effect 2.
Cause 1 and Effect 1 are not linked, just as Cause 2 and Effect 2 are not linked
• An event can have two causes that triggers just one effect eg. A pen going into alarm
and a Totaliser starts, this could have the effect of starting Logging.
• An event can have one cause that has two effects, eg. A pen could go into alarm and
the effects could be that the alarm is acknowledged and a Totaliser is started. See
"Event 1 example:" on page 81
• An event can have two causes that have two effects, eg. A pen goes into alarm and a
Totalisers is started, the effects could be the alarm is acknowledged and a mark on
chart is displayed to show the start of the totaliser.
Table 4.2 : Events - Cause and Effect
Cause
Alarm
Totalisers
Digital Inputs
T/C Burn Out
Scheduled
User Counters
Max Mins (Reset)
.
Into Alarm
Out of Alarm
Acknowledge Alarm
Start
Stop
Reset
On
Off
State Change
Analogue Input #
Once
Interval
Specific Days
Month End
User Counter #
Reset Max/Min values
Effect
Mark on Chart
Logging
Totaliser
Digital Outputs
Alarm Acknowledge
Email
Screen Change
Print Screen
Counters
Max Mins (Reset)
Chart Control
Clear All Messages
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
